Panasonic WJ-ND400K

25
Basic operation
1 Access the recorder and display the top page of
the operation window.
2 Click the [Setup] button.
The setup menu buttons will be displayed.
3 Click the desired setup menu button.
The setup menu page respective to the clicked
setup menu button will be displayed.
4 Click the desired tab on the setup menu page.
The setup menu page of the clicked tab will be dis-
played.
5 Configure each setting item.
6 Click the [Set] button after completing each set-
ting item.
The configured settings will be applied.
When displaying other setup menu page without
clicking the [Set] button, the edited settings will not
be applied.
Important:
 • Whenanyofeditedsettingsareapplied,alllogin
users will forcibly be logged out.
 • Whenanysettingrelatingtotheusermanagement
is edited and applied, all login users will forcibly be
logged out.
 • Itmaybeimpossibletorecordimagesforaround4
seconds just after clicking the [Set] button to apply
the edited settings.
 • Onlyasingleusercanoperatethesetupmenuata
time. It is impossible to open the setup menu when
another user is operating it.
 • Whenthewebbrowserisclosedintheprocessof
accessing the setup menu to open, it will become
impossible to access the setup menu for around 90
seconds. When any of the setup menu buttons is
clicked, the message window saying that the other
user is currently operating the setup menu.