Panasonic WJ-ND400K

30
Program setup
Select a program that determines basic operation of the recorder such as the live image transmission rate, record-
ing rate, etc.
1 Click the [Quick] button.
The "Quick" page will be displayed.
2 Configure each setting item.
Refer to "Setup items" mentioned below.
3 Click the [Set] button.
■ Program setup
Select a program.
Program 1 (default) - Program 8
Click the [Display] button to check the detailed settings
of the selected program.
Refer to the "Program" section on page 43 for informa-
tion on how to set programs.
Note:
 • Whenthecameraregistrationisperformedonthe
"Quick" page, the live image transmission rate and
the recording rate (manual recording) of "Program
1" - "Program 8" will be set to "1 ips".
Setup items