Panasonic WJ-ND400K

26
Quick settings
Configure the minimum settings required to operate the recorder such as the language setting, time & date, net-
work settings, camera registration, etc.
Setup
Language/Time & date
Select the display language and set the current time and date.
1 Click the [Quick] button.
The "Quick" page will be displayed.
2 Configure each setting item.
Refer to "Setup items" mentioned below.
3 Click the [Set] button just below the "Time &
date" setting.
Important:
 • Ablackscreenmaybedisplayedandrecordingmay
not be performed for around 4 seconds just after
the current time and date is changed by editing the
time & date setting or shifting to/from summertime.
Note:
 • Whennocameraisregistered,the"Quick"pagewill
be displayed automatically.
 • Thereare4sectionsaccordingtotherelatedset-
tings as follows; "Language/Time & date", "Network
settings", "Network camera registration setup" and
"Program setup". After editing the settings, click the
[Set] button in each section to apply the edited set-
tings.
■ Language
Select the display language of the web browser from
the following.
Contact your dealer for further information about the
customized language (Custom).
Japanese/English (default)/Français/Español/Deutsch/
Italiano/Russian/Chinese/Custom
■ Time & date
Adjust the current time and date.
Select numbers for year, month, day, hour and minute,
and click the [Set] button.
08 - 34 (year)/1 -12 (month)/1 - 31 (day)/0 - 23 (hour)/
0 - 59 (minute)
Setup items