Panasonic WJ-ND400K

85
1 Click the [Maintenance] button.
2 Click the [Settings management] tab.
The "Settings management" page will be displayed.
3 Click the desired button according to your pur-
pose.
The selected action will be taken.
Refer to the table "Settings management" for infor-
mation about the setting items.
Settings management
It is possible to save the settings of the setup menu in the recorder, and to call up saved settings (load). It is also
possible to reset he settings of the setup menu to the default.
Settings management
Item Description
User setup save The settings will be saved in the recorder.
User setup load The saved settings will be loaded onto the recorder.
Reset to the default The settings will be reset to the default.
Important:
 • Thefollowingsettingswillnotberesetorloadedevenwhenthe[Execute]buttonof"Resettothedefault"orthe
[Load] button is clicked.
NW link down detection
Bandwidth control
HTTP port number
FTP port number
Network setup
DNS setup
 • Whenthesettingsareloadedbyclickingthe[Load]buttonthe"Hostauthentication"settingwillbesetto"Off".