63
Network
1 Click the [Network] button.
2 Click the [Basic] tab.
The "Basic" page of "Network" will be displayed.
3 Configure each setting item.
Refer to "Setup items" mentioned next page.
To configure the port forwarding setting, go to step
5.
To configure the static route, go to step 7 and follow
the procedures.
4 Click the [Set] button.
5 Click the [Setup>>] button of "Port forwarding".
The "Port forwarding" window will be displayed.
6 Set the port numbers and click the [Set] button.
The "Port forwarding" window will close.
Basic
Configure the network settings of the recorder.
To Next Page
Loading...
