Panasonic WJ-ND400K

55
1 Click the [Camera] button.
2 Click the [Sequence] tab.
The "Sequence" page will be displayed.
3 Configure each setting item.
Refer to "Setup items" mentioned next page.
When the [Setup>>] button is clicked, the detailed
settings window of the selected sequence display
type will be displayed.
4 Click the [Set] button.
Note:
 • Tochangetheorderofthesequencedisplayona
4-screen, change the camera number. (Page 51)
 • Whentheimagecompressionmethodofthecam-
era assigned to the selected camera channel is
"MPEG-4", the respective sequence step will be
skipped.
Sequence
The camera channels will be switched and images from the cameras will be displayed sequentially in order set in
advance.