Panasonic WJ-ND400K - Page 16

16
5 Configure the settings and perform operations
by clicking the buttons and the tabs on the oper-
ation window.
Important:
 • Ifamessageisdisplayedontheinformationbar,
see page 102.
Note:
 • Whenthetoppageisdisplayedforthefirsttime,the
install wizard of the ActiveX control required to dis-
play images from the camera will be displayed.
Follow the instructions of the wizard.
 • WhenActiveXforWJ-ND200/WJ-ND300is
installed, remove "WebVideo ActiveX" using the
"Add or Remove Programs" control panel. After
confirming that "WebVideo ActiveX" is deleted,
install ActiveX of WJ-ND400.
 • Whentheinstallwizardisdisplayedagainevenafter
completing the installation of the ActiveX, reboot the
PC.
6 Close the web browser when there is no more
operation/settings configuration to be per-
formed.
Click the [X] button at the top right of the window or
shut down the browser.