95
Display Description
Single mode format failure: Recorder: MAIN-y SINGLE FORMAT ERROR
Extension unit: EXTx-y SINGLE FORMAT ERROR
x is unit number, y is disk number.
RAID5 mode format failure: Recorder: MAIN RAID5 FORMAT ERROR
Extension unit: EXTx RAID5 FORMAT ERROR
x is unit number.
RAID6 mode format failure: Recorder: MAIN RAID6 FORMAT ERROR
Extension unit: EXTx RAID6 FORMAT ERROR
x is unit number.
HDD remove error: Recorder: MAIN-y SWAP WARNING
Extension unit: EXTx-y SWAP WARNING
x is unit number, y is disk number.
Alteration detected: ALTERED **CH
** is camera channel.
*1 HDD capacity warning
A warning mail with the <except FULL> content will be sent when the available disk capacity becomes less than
the set value for "HDD capacity warning" on the [Disk] tab page under "Maintenance". After a warning mail is
sent, a warning mail with the <except FULL> content will be sent each time 1% of the available disk capacity is
reduced, and a warning mail with the <FULL> content will be sent when there is no available disk capacity.
*2 The HDD smart warning mail is not sent in the RAID 5 or RAID 6 mode.
To Next Page
Loading...
