Panasonic WV-SP105

46
46
47
Configure the settings relating to DDNS [DDNS]
Click the [DDNS] tab on the "Network" page. (☞Pages13and14:Howtodisplay/operatethesetupmenu)
When using the DDNS function, it is possible to access with "Host name registered in the DDNS server.nmdns.net".
To use the DDNS function, it is necessary to connect to the dedicated DDNS server. Refer to the web site for further
informationabouttheDDNS.RefertothereadmefileontheprovidedCD-ROMforthewebsiteaddress.
It is necessary to configure the host name, user name and password registered in the DDNS server.
[DDNS]
Select"On"or"Off"todeterminewhetherornottouse
the DDNS function.
Default:Off
[Host name]
Enter the host name to be used.
Available number of characters: 1 - 64 characters
Default: None (blank)
[User name]
Enter the user name (login name) to access the DDNS
server.
Available number of characters: 1 - 32 characters
Default: None (blank)
[Password]
Enter the password to access the DDNS server.
Available number of characters: 0 - 32 characters
Default: None (blank)
[Access interval]
Select the interval to access the DDNS server to check
the IP address and the host name from the following.
1min/ 10min/ 30min/ 1h/ 6h/ 24h
Default: 1h