Panasonic WV-SP509

22
Wire engaging hole
Safety wire (accessory)
For mounting on wall
z Put the tripod mount base on the bottom of the camera.
Secure the safety wire lug for wall (accessory) to the camera mount screw hole with the wire
lug fixing screw (accessory).
IMPORTANT:
 • Be sure to usethe providedfixing screws
for the safety wire lug and the removed
screws for the camera mount base.
When using different length screws, it may
damage the camera or cause the camera
to fall.
(Recommended tightening torque:
0.39 N·m {0.29 lbf·ft})
x Engage the safety wire (accessory) with the wire engaging hole.
q Pass the ring part of the safety wire
through the wire engaging hole.
w Pass the other end of the safety wire
through the ring part of the safety wire.
T
W
Wire engaging
hole
Fixing screw
hole
Wire lug xing
screw (accessory)
Safety wire lug
for wall
(accessory)
* Leave these holes
untouched.
Tripod mount base
Mounting screws