Panasonic WV-SP509

31
Installing the manuals
OntheCDlauncherwindow,clickthe[Install]buttonnextto[Manual]todisplaytheManualinstalla-
tion window. Confirm the following settings before starting the installation.
q
r
e
w
t
q Select which manuals to install. The camera models that the manuals support are displayed in
w"ModelList".
w The camera models that are supported by the manuals selected in q are displayed here.
e Select where to create the manuals shortcut icon when the manuals are installed.
r Specify which folder on the PC to install the manuals to.
t Clickthe[Install]buttontostarttheinstallation.
Note:
 •  To uninstallthemanualsdeletetheshortcuticonfromwhereyouspecifiedittobeinstalled(the
defaultisonthedesktop)duringinstallationandthe[Manual]folderfromthefolderyouspeci-
fied during the manuals installation.
Installing the Viewer software
The Viewer software (Network Camera View4S) must be installed on the PC in order to display
cameraimages.OntheCDlauncherwindow,clickthe[Install]buttonnextto[ViewerSoftware],and
follow the instructions displayed on the window to install the software. A message is displayed if a
PC that does not have the Viewer software installed tries to access the camera. Install the software
byfollowingtheinstructionsdisplayedonthewindow.Referto"Viewersoftware"intheOperating
Instructions for further information.
Note:
 •  To uninstalltheViewersoftware,followthestepsbelowfordependingontheOSusedonyour
PC.
  WindowsXP:
   Delete[NetworkCameraView4S]from[ControlPanel]-[AddorRemovePrograms].
  WindowsVista/Windows7:
   Delete[NetworkCameraView4S]from[ControlPanel]-[Programs]-[Uninstallaprogram].