Panasonic WV-SP509

32
Configure the network settings of the camera using the
Panasonic IP setting software
ItispossibletoperformthenetworksettingsofthecamerausingtheIPsetupsoftwareonthepro-
videdCD-ROM.Whenusingmultiplecameras,itisnecessarytoconfigurethenetworksettingsof
each camera independently.
IfthePanasonicIPsettingsoftwaredoesnotwork,configurethenetworksettingsofthecamera
and the PC individually on the "Network" page of the setup menu. Refer to the Operating
Instructions(includedintheCD-ROM)forfurtherinformation.
IMPORTANT:
 • When usingMicrosoftWindows 7or MicrosoftWindows Vista,the "Windows SecurityAlert"
window may be displayed when starting the IP setup software. In this case, disable "User
AccountControl"fromthecontrolpanel.
 • Forthesecurityenhancement,theMACaddress/IPaddressofthecameratobeconfiguredwill
not be displayed when around 20 minutes have passed after turning on the power of the cam-
era.(Whentheeffectiveperiodissetto"20min"intheIPsetup)
However cameras in the initial set mode are still displayed even after 20 minutes.
 • PanasonicIPsettingsoftwareisinoperableinothersubnetsviathesamerouter.
 • ThiscameracannotbedisplayedorsetwithanolderversionoftheIPsetupsoftware(version2.xx).
z TostartthePanasonicIPsettingsoftware,clickthe[Run]buttonnextto[IPSettingSoftware]
fromtheCDlaunchermenuwindow,ordouble-clickontheshortcuticoncreatedafterinstall-
ing the software on the PC.
 • TheLicenseAgreementwillbedisplayed.ReadtheAgreementandchoose"Iaccepttheterm
inthelicenseagreement",andclick[OK].
x Clickthe [NetworkSettings]button afterselecting
the MAC address/IP address of the camera to be
configured.
Note:
 • WhenusingaDHCPserver,theIPaddressassignedtothecameracanbedisplayedbyclick-
ingthe[Search]buttonoftheIPsettingsoftware.
 • When a duplicate IP address is used, the corresponding camera number will be displayed
shaded.
 • When the[AccessCamera]buttonisclicked,liveimagesofthe selected camera willbedis-
played.
 • Itispossibletochangethe"Cameralist"displaybetweenIPv4addressesandIPv6addresses
in accordance with the protocol in use.
 • Theinformationdisplayedcanbesortedbyclickingthetitleofeachdisplayeditem.
Configure the network settings