Panduit PanTher LS8 User Manual

CREATING SERIALIZATIONS
18
More Serialization Parameters
The serialization tool includes more parameters on a second screen following
the first screen. The second screen includes Copies and Collate. To access
the second screen press the down directional arrow twice after Increment.
1. The Copies parameter determines the number of copies to print for the
serialization. The Copies parameter can be set to any number from 1 to
99.
To change the Copies parameter, press the up or down directional
arrow keys to highlight Copies.
Press the right directional arrow key to move the cursor to the current
value of the Copies parameter. The Copies parameter will default to a
value of 1. Enter the number of copies to print.
Press the key to accept the changes.
2. The Collate parameter determines whether or not the copies of the
serialization items will be collated. The Collate parameter only works
when more than one copy of a serialization is defined. The Collate
parameter defaults to No.
If No is selected, then consecutive copies of the serialization items will
be placed together. The result will resemble the following legend:
If Yes is selected for Collate, then consecutive copies of the serialization
items will not be placed together. The result will resemble the following
legend:
A01 A02 A03 A01 A02 A03
A01 A01 A02 A02 A03 A03

Panduit PanTher LS8 Specifications

Display

display	4 line x 14 graphic LCD with backlight
lcd contrast control	Adjustable via keypad

Power

power supply	6 AA alkaline batteries
ac adapter	Universal Input (100 - 240 VAC, 50/60 Hz)
operating temperature	41-104° F (5-40 °C)

Weight and Dimensions

weight	1.8 lbs. (1.86 kg)
effective print width	1.00” (25.4 mm)
print length	30.00” (maximum label length)