EasyManua.ls Logo

Pantech Breakout - Page 106

Pantech Breakout
430 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
105
CONNECTIVITY
ABOUT NETWORK NOTIFICATIONS
You are informed by default when a Wi-Fi network is available around you. The icon in the status bar
indicates a network is available. Touch Network notification in the Wi-Fi settings if you do not want to
be informed the availability of the network.
USING THE EASY SETTING
1 Touch on the top of the Home screen and drag it down.
2 Touch Easy Setting. The icon turns light green when the function is on.
SETTING Wi-Fi NETWORKS
1 Touch Apps from the Home Screen. Touch Settings .
2 Touch Wireless & networks > Wi-Fi settings.
3 Touch Wi-Fi to activate the technology.
4 Touch WPS connection if you want to establish a new wireless connection automatically using the
Wi-Fi Protected Setup (WPS). You should press WPS on your Wi-Fi access point within two minutes.
x Touch Button connection. You should press WPS button on your Wi-Fi access point within 2
minutes.
x Touch PIN connection. You should enter PIN at your Wi-Fi access point within 2 minutes.
SEARCHING FOR Wi-Fi NETWORKS
1 Touch Apps from the Home Screen. Touch Settings .
2 Touch Wireless & networks > Wi-Fi settings.
3 Touch Wi-Fi to activate the technology.
4 Press the Menu Key B and touch Scan. The Breakout™ scans networks automatically every six
seconds. The newly found networks appear on the bottom of the list.

Table of Contents

Related product manuals