Pantum P2200 Series Maintenance Manual

1–6
1.1.3.2 Cancel/Continue Button Functions
Printer status
Operation
Printer action
Sleep Mode
Short press or
long press
button 2
Wake up from the sleep mode
Error
The printer is out of
paper or a feed jam
occurred
Short press
button 2
Continue printing
A print job exists
Long press
button 2
Cancel the current print job
Ready
Long press
button 2
Print the test page (Not for printers
without WIFI)
Printing
Long press
button 2
Cancel the current print job (The job
pages of which the numbers have
been received by the printer will still
be printed out while those waiting
to be received will be canceled from
printing.
Shutdown State
Press button 2
Only for printers with WIFI, you can
turn on the printer, then press and
hold button 2 for at least 5 seconds
to restore the printer's factory
defaults (resetting the IP address,
admin password, etc.).
Printers without WIFI do not
respond to this action.

Pantum P2200 Series Specifications

General

Print Technology	Monochrome Laser
Max Print Resolution	1200 x 1200 dpi
Paper Input Capacity	150 sheets
Paper Output Capacity	100 sheets
Printer Language	GDI
Processor Speed	600 MHz
Memory	64 MB
Connectivity	USB 2.0
Media Weight	60-163 g/m²
Compatible Operating Systems	Windows, Linux, Mac OS
Dimensions	337 x 220 x 178 mm
Weight	4.75 kg
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Page Volume	250 to 2, 000 pages
Media Types	Plain, Cardstock, Label, Envelope, Thin
Media Sizes	A4, A5, A6, B5, Legal, Letter, Executive, DL envelope, C5 envelope, Postcard
Power Consumption	Average: 370W
Print Speed	Up to 20 ppm