Pantum P2200 Series Maintenance Manual

6–5
6.4 Clearing Jammed Paper
Note:
• Remove the jammed paper with the following steps: close the upper cover and
tidy the paper in the paper tray, then the printer will automatically resume
printing. If the printer does not automatically start printing, please press the
Control Panel button.
• If the printer still does not start printing, please check whether all the jammed
paper inside the printer has been cleared.
• If you can not remove the jammed paper yourself, please contact your local
Pantum authorized repair center or send the printer to the nearest Pantum
authorized service center for repair.
6.4.1 Feed jam
Gently draw the jammed paper out.
If the paper does not move when you draw it or there is no paper in this area, check
the inside of the printer.

Pantum P2200 Series Specifications

General

Print Technology	Monochrome Laser
Max Print Resolution	1200 x 1200 dpi
Paper Input Capacity	150 sheets
Paper Output Capacity	100 sheets
Printer Language	GDI
Processor Speed	600 MHz
Memory	64 MB
Connectivity	USB 2.0
Media Weight	60-163 g/m²
Compatible Operating Systems	Windows, Linux, Mac OS
Dimensions	337 x 220 x 178 mm
Weight	4.75 kg
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Page Volume	250 to 2, 000 pages
Media Types	Plain, Cardstock, Label, Envelope, Thin
Media Sizes	A4, A5, A6, B5, Legal, Letter, Executive, DL envelope, C5 envelope, Postcard
Power Consumption	Average: 370W
Print Speed	Up to 20 ppm