Spectra LED Keypads 15
4.4 Stay Arming
This method allows you to remain in the protected area
while partially arming the system. Stay zones are zones
that are bypassed when Stay arming. For example, when
you go to sleep at night, doors and windows can be armed
without arming other zones like motion detectors.
When you correctly Stay arm the system, the
ARM light
corresponding to the armed partition will flash and the Exit
Delay will be initiated (see page 13). Stay arming can also
be activated using Auto-Arming (see page 21), a keyswitch
(see page 20), or One-Touch arming (see page 19).
4.4.1 Instant Arming
After Stay arming the system and during its Exit Delay,
press and hold the [
STAY] button for 3 seconds. You should
hear a confirmation beep. The system is then Instant
armed. Therefore, any armed zone that is breached will
immediately generate an alarm.
How do I Stay arm?
1. Close all zones in the desired partition (except Stay
zones).
2. Press the [
STAY] button.
3. Enter your [
ACCESS CODE].
If you have access to both partitions (see page 9):
4. Buttons [1] and [2] will flash. Press the button
corresponding to the desired partition. For both partitions,
press the other button after the confirmation beep.
To Next Page
Loading...
Need help?
General
