Spectra LED Keypads 19
4.7 One-Touch Arming
One-Touch arming allows you to arm the system without
using an access code.
If both partitions are enabled and you activate a
One-Touch feature, buttons [1] and [2] will flash.
Press the button corresponding to the desired
partition(s).
4.7.1 One-Touch Regular Arming
Press and hold the [
ENTER] button for 3 seconds (see note
above) to arm all zones in the partition. You can use this
feature to allow specific individuals like service personnel
(i.e. cleaners) to arm without giving them access to any
other alarm system operations. For details on Regular
Arming, refer to page 14.
4.7.2 One-Touch Stay Arming
Press and hold the [
STAY] button for 3 seconds (see note
above) to arm all zones not defined as Stay zones. For
details on Stay arming, refer to page 15.
4.7.3 Fast Exit
When the system is already Stay armed, this feature will
allow you to exit already armed premises and keep the
system armed.
Exit and Stay Arm: Press and hold the [
STAY] button for 3
seconds (see note above) to start the Exit Delay (see
page 13). When the Exit Delay elapses, the system will
return to Stay arming.
To Next Page
Loading...
Need help?
General
