Spectra LED Keypads 29
7.0 Testing & Maintenance
With the system disarmed and the READY light ON, activate
motion detectors by walking in the protected area. Open
and close protected doors and verify that the
corresponding button illuminates. Your installer can advise
you of the best way to test your particular system.
Do not use open flame or burning materials to test your fire
detection devices. Contact your installer for safe methods
of testing your system.
Under normal use, your system requires virtually no
maintenance other than regular testing. It is recommended
that the standby battery be changed every three years.
Speak to your installer about the necessary tests and at
what frequency they should be performed.
To Next Page
Loading...
Need help?
General
