24 User’s Guide
5.6 Quick Function Keys
Upon the request of your installer or monitoring station you
may have to perform one of the following. Press:
5.6.1 Test Report
[ENTER] + [MASTER CODE] + [MEM]
If your system is monitored by your monitoring station, this
feature will send a test report code to the monitoring
station.
5.6.2 Call PC
[ENTER] + [MASTER CODE] + [BYP]
Will initiate a call to the monitoring station that is using the
upload/download diagnostic software.
5.6.3 Answer PC
[ENTER] + [MASTER CODE] + [FORCE]
Will force your security system to answer a call made by
your monitoring station that is using the upload/download
diagnostic software.
5.6.4 Cancel Communication
[ENTER] + [MASTER CODE] + [STAY]
Cancels all communication with the upload/download
diagnostic software if it has been initiated.
5.7 Keypad Backlight
The illumination level behind the keys can be modified to
suit the user’s needs. There are four backlight levels. The
[MEM] key is used to set the desired level. Each
consecutive push of the [
MEM] key will increase the
backlight level until the maximum level is reached. After
To Next Page
Loading...
Need help?
General
