4 User’s Guide
2.2 Keypad Indicator Lights
All Spectra LED keypads include coloured lights which
convey the current status of your system. As explained in
Figure 1 on page 3, the state of each light represents a
specific condition in your system.
2.3 Zone Display
The numerical buttons on the 1686V/H keypads are
designed to communicate the status of the zones in your
system. Each button corresponds to a zone in your system.
If a button’s light is OFF (extinguished), the corresponding
zone is closed. If a button’s light is ON (illuminated), the
corresponding zone is open (i.e. open door, movement
detected, etc.).
2.4 Alarm Memory Display
If an alarm has occurred on a zone, the [MEM] button will
illuminate. All zones where alarms occurred will be stored
in memory. After disarming the system, press the [MEM]
button to illuminate the buttons corresponding to the zones
that were in alarm (see Zone Display on page 4). To exit
the Alarm Memory Display, press the [
CLEAR] button. The
system will erase the contents of the Alarm Memory every
time the system is armed.
2.5 Trouble Display
Your alarm system continuously monitors fourteen possible
trouble conditions. Most of these trouble conditions can be
reported directly to your monitoring station. When a trouble
condition occurs, [
TBL] will illuminate.
To Next Page
Loading...
Need help?
General
