Paradox Magellan MG5050 EN User Manual

52 Reference & Installation Manual
12.31 Personal Reporting Delay
Section [836]: Communication Timers
000 to 255 times, Max. 127, Default = 5
When using the Personal Reporting Format, the control panel will wait for the Personal Delay period before transmitting the
report codes. This is to allow time for the system to provide a dial tone or to bypass the “welcome” message before sending data.
This section applies to the Plug-in Voice Dialer when using a VDMP3.
12.32 Personal Reporting Message Repetition
Section [837]: Communication Timers
000 to 255 times, Max. 10, Default = 3
When using the Personal Reporting Format, the control panel will repeatedly send the report codes to the pager until the
transmission has been acknowledged. This section applies to the Plug-in Voice Dialer when using a VDMP3.
12.33 Disable Reporting
Sections [800]
Option [1] OFF = Dialer Activated (default)
Option [1] ON = No Dialer
With this option disabled (default), the control panel will continue to report events. With the option enabled, reporting is disabled.

Paradox Magellan MG5050 EN Specifications

General

Partitions	2
Wireless Zones	32
User Codes	32
Event Buffer	256
Remote Control	Yes
Wireless Keypads	Supported
StayD Mode	Yes
RF Frequency	433 MHz or 868 MHz
Users	32
Compatibility	Paradox wireless devices
Communication	GSM, IP
Type	Control Panel
Power Supply	16.5 VAC
Battery Backup	12 VDC, 7 Ah
Operating Temperature	0°C to 50°C
Humidity	5% to 90% non-condensing
Zones	32 (8 on-board)