Page 23
Firmware Upgrades
Step 2: Select Device(s)
1) Click the Connect/Refresh button. A dialog box will
appear. The dialog box provides the information required
to initiate the connection to the PCS300. In order to initiate
the connection to the PCS300, you will require a cellular
telephone and the PCS300’s SIM card phone number. For
more information on the SIM card phone number, please
refer to the PCS300 Operations Manual.
2) Enter the SMS text information to be sent to the PCS300
as it is displayed on the screen using a cellular phone.
e.g., Pparadox.A10.10.1.100.P10001
Once the connection has been established the dialog box
will close automatically.
3) Select the PCS300 Module to update from the list.
4) Proceed to Step 3: Select Firmware.
Code Description
P Defines the login password used when
logging into the PCS300 Web Interface page.
A Defines the IP address of the PC used to
initiate communication.
P Defines the Port of the PC used to initiate
communication.
To Next Page
Loading...
Need help?
General
