Paradox Spectra SP4000 Programming Guide

20 Programming Guide
Partition Timers
Refer to the Installer Quick Menu on page 65 for alternate entry/exit and bell cut-off timer programming.
System Programming
[742] Partition 2 Options
Option
OFF ON
[1]
Auto-arm on time

Disabled Enabled
[2]
Auto-arm on no movement

Disabled Enabled
[3]&[4]
Auto-arm arming mode
 See Table  See Table
[5] Switch to stay arming if no entry delay zone is opened

Disabled Enabled
[6] Follow zones become entry delay 2 when delay zone is bypassed

Disabled Enabled
Section Data Description
[745] ____/____/____ (000 to 255) seconds Partition 1 exit delay (default 060)
[746] ____/____/____ (000 to 255) seconds Partition 2 exit delay (default 060)
[747] ____/____/____ (000 to 255) minutes Partition 1 bell cut-off (default 004)
[748] ____/____/____ (000 to 255) minutes Partition 2 bell cut-off (default 004)
[749] ____/____/____ (000 to 255) x 15 minutes Partition 1 no movement (default 000)
[750] ____/____/____ (000 to 255) x 15 minutes Partition 2 no movement (default 000)
[761] ____/____:____/___ HH: MM Auto-arm on time Partition 1 (default 00:00)
[762] ____/____:____/____ HH: MM Auto-arm on time Partition 2 (default 00:00)
[700] General System Options
Option OFF ON
[2] Battery charging (350mA or 700mA)* 
350mA
 700mA
[3] Audible trouble warning (except AC failure)

Disabled Enabled
[4] Audible trouble warning on AC failure

Disabled Enabled
[6] Exit delay termination

Disabled Enabled
[7] Tamper supervision on the bus module

Disabled Enabled
* Does not apply to SP4000 systems
[702] Panic Options
Option OFF ON
[1] Panic 1

Disabled Enabled
[2] Panic 2

Disabled Enabled
[3] Panic 3

Disabled Enabled
[4] Panic 1: Report only or audible alarm

Report only Audible
[5] Panic 2: Report only or audible alarm

Report only Audible
[6] Panic 3: Report only or audible alarm

Report only Audible
[703] Arming/Disarming Options
Option OFF ON
[5] Restrict arming on battery failure

Disabled Enabled
[6] Restrict arming on tamper failure (Zone + Bus Module
+ Wireless PGM)

Disabled Enabled
[7] Restrict arming on wireless supervision trouble (Wireless zones +
Wireless PGM)*

Disabled Enabled
* Does not apply to SP4000 systems.
[704] Arming/Disarming Options
Option OFF ON
[1] Regular arming switches to force arming
 Disabled

Enabled
[2] Stay arming switches to stay force arming
 Disabled
 Enabled
[3] Sleep arming switches to sleep force arming
 Disabled

Enabled
[3] [4]
OFF OFF Regular
OFF ON Sleep
ON OFF Stay

Paradox Spectra SP4000 Specifications

General

Partitions	2
User Codes	32
Event Buffer	256 events
StayD Mode	Yes
Expandable via Expansion Modules	Yes
Bus	Yes, 4-wire expansion bus
Battery Backup	12V 7Ah
PGM Outputs	2