Paradox Spectra SP4000 Programming Guide

36 Programming Guide
Programmable Output Serial Numbers
NOTE: To delete a wireless PGM, enter [000000] in its respective section.
NOTE: To view the serial number, refer to section [960].
NOTE: For automatic assignment, press the PGM’s anti-tamper switch while in the respective section.
Refer to the Installer Quick Menu on page 65 for alternate PGM programming.
Wireless PGM Signal Strength
NOTE: To view the wireless PGM signal strength, press the wireless PGM’s anti-tamper switch while in the respective section.
System Report Codes
Entering Report Codes
Ademco Slow, Silent Knight, SESCOA, and Ademco Express Formats:
Enter the desired 2-digit hex value (00-FF).
Ademco “Programmable” Format:
Enter the desired 2-digit hex values from the “Ademco Report Code List - Programmable” (see page 39). Also Note that entering FF will
set the report code to the “Automatic Report Code List” (see page 40).
Ademco “All Codes” Format:
The control panel automatically generates report codes from the “Ademco Report Code List - All Codes” (see page 40).
Refer to Decimal and Hexadecimal Values on page 6.
Clear System Report Codes
Section Wireless PGM Serial Number Section Wireless PGM Serial Number
[301] PGM 1: ____/____/____/____/____/____ [309] PGM 9: ____/____/____/____/____/____
[302] PGM 2: ____/____/____/____/____/____ [310] PGM 10: ____/____/____/____/____/____
[303] PGM 3: ____/____/____/____/____/____ [311] PGM 11: ____/____/____/____/____/____
[304] PGM 4: ____/____/____/____/____/____ [312] PGM 12: ____/____/____/____/____/____
[305] PGM 5: ____/____/____/____/____/____ [313] PGM 13: ____/____/____/____/____/____
[306] PGM 6: ____/____/____/____/____/____ [314] PGM 14: ____/____/____/____/____/____
[307] PGM 7: ____/____/____/____/____/____ [315] PGM 15: ____/____/____/____/____/____
[308] PGM 8: ____/____/____/____/____/____ [316] PGM 16: ____/____/____/____/____/____
Section Section
[321] PGM 1 Wireless PGM Signal Strength [329] PGM 9 Wireless PGM Signal Strength
[322] PGM 2 Wireless PGM Signal Strength [330] PGM 10 Wireless PGM Signal Strength
[323] PGM 3 Wireless PGM Signal Strength [331] PGM 11 Wireless PGM Signal Strength
[324] PGM 4 Wireless PGM Signal Strength [332] PGM 12 Wireless PGM Signal Strength
[325] PGM 5 Wireless PGM Signal Strength [333] PGM 13 Wireless PGM Signal Strength
[326] PGM 6 Wireless PGM Signal Strength [334] PGM 14 Wireless PGM Signal Strength
[327] PGM 7 Wireless PGM Signal Strength [335] PGM 15 Wireless PGM Signal Strength
[328] PGM 8 Wireless PGM Signal Strength [336] PGM 16 Wireless PGM Signal Strength
Signal Strength Indicator 8 to 10 / 3 beeps = Best signal 5 to 7 / 2 beeps = Average signal 1 to 4 / 1 beep = Weak signal (Relocate)
[966] Clear Report Codes
Option OFF ON
[3] Clear arm/disarm/alarm report codes*
 Disabled

Enabled
[4] Clear trouble report codes*
 Disabled

Enabled
[5] Clear system special report codes*
 Disabled
 Enabled
* Ensure all other options are deselected. Press [
ENTER] to clear the respective set of report codes before exiting the section.

Paradox Spectra SP4000 Specifications

General

Partitions	2
User Codes	32
Event Buffer	256 events
StayD Mode	Yes
Expandable via Expansion Modules	Yes
Bus	Yes, 4-wire expansion bus
Battery Backup	12V 7Ah
PGM Outputs	2