Paradox Spectra SP4000 Programming Guide

Magellan / Spectra SP 43
Wireless Repeater Programming (RPT1)
Wireless Repeater Assignment
NOTE: For automatic assignment, press the wireless repeater’s anti-tamper switch while in the respective section.
NOTE: For label character tables, see LCD Keypad Labels (K32LCD) on page 47.
NOTE: This section also applies to wireless siren programming see page 46.
Wireless Repeater Signal Strength
NOTE: To view the wireless repeater’s signal strength, press the wireless repeater’s anti-tamper switch while in the respective section.
Wireless Repeater Options
NOTE: Remote control signals are always repeated.
Section Wireless Repeater Serial Number
[545] Repeater 1 ___/___/___/___/___/___
[546] Repeater 2 ___/___/___/___/___/___
Section
Wireless Repeater Labels
[568] Repeater 1 ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[569] Repeater 2 ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[965] Reset Wireless Repeater/Siren Labels
Option OFF ON
[6] Reset wireless repeater/siren labels*
 Disabled

Enabled
* Ensure all other options are deselected. Press [
ENTER] to reset the respective set of labels to default before exiting the section.
Section
[548] Wireless Repeater 1 Signal Strength
[549] Wireless Repeater 2 Signal Strength
Signal Strength Indicator 8 to 10 / 3 beeps = Best signal 5 to 7 / 2 beeps = Average signal 1 to 4 / 1 beep = Weak signal (Relocate)
[700] RF Jamming Supervision
Option OFF ON
[5] RF jamming supervision
 Disabled

Enabled
RPT1 #1
[551]
RPT1 #2
[561]
Option OFF ON OFF ON
[1] Repeat Wireless Keypad 1 Signals 



[2] Repeat Wireless Keypad 2 Signals 



[3] Repeat Wireless Keypad 3 Signals 



[4] Repeat Wireless Keypad 4 Signals 



[5] Repeat Wireless Keypad 5 Signals 



[6] Repeat Wireless Keypad 6 Signals 



[7] Repeat Wireless Keypad 7 Signals 



[8] Repeat Wireless Keypad 8 Signals 



RPT1 #1
[552]
RPT1 #2
[562]
Option OFF ON OFF ON
[1] Repeat Wireless Zone 1 Signals 



[2] Repeat Wireless Zone 2 Signals 



[3] Repeat Wireless Zone 3 Signals 



[4] Repeat Wireless Zone 4 Signals 



[5] Repeat Wireless Zone 5 Signals 



[6] Repeat Wireless Zone 6 Signals 



[7] Repeat Wireless Zone 7 Signals 



[8] Repeat Wireless Zone 8 Signals 




Paradox Spectra SP4000 Specifications

General

Partitions	2
User Codes	32
Event Buffer	256 events
StayD Mode	Yes
Expandable via Expansion Modules	Yes
Bus	Yes, 4-wire expansion bus
Battery Backup	12V 7Ah
PGM Outputs	2