Parker CHELSEA - E.O.C. Installation for 885 Series (12;24 V) (SK-468)

Parker Hannifin Corporation
Chelsea Products Division
Olive Branch, MS 38654 USA
8
Bulletin HY25-1650-M1/US
Installation Sketch
(4.9")
UP
IN CYL
R
CHELSEA
CHELSEA
NOTE: 1) Strip Wire Ends .25" Prior to Installing in Connectors
378414 Pressure Protection Valve
378416 Hex Nipple
Air Supply 90-140 PSI
Note Direction of Arrows
379042 Connector
379044-7 Plastic Tubing
16 AWG Wire, Black Connect to Ground
16 AWG Wire, Red Connect to 12 VDC or 24 VDC, 5A Minimum Ignition Circuit
379306 Spade Terminal
379305 Pressure Switch
379306 Spade Terminal
379258 Bracket
378966 Street Te e
379043 Elbow
379303-1 Solenoid 12V 379303-2 Solenoid 24V
500457-6 Screw
500357-7 Washer
379043 Elbow
379106 Breather
379253 Ring Connector Connect to Ground
Electronic Overspeed Controller - 329650X
(1.8")
(1.0")
16 AWG Green Wire
16 AWG Blue Wire
Speed Sensor Extension Cable 328923-10X (10 Ft Supplied w/E.O.C.) 328923-5X (5 Ft Optional Cable)
379254-13 14 AWG Wire, Blue
379253 Ring Connector Connect To Ground
Run Wires Through Grommet In Firewall
379254-8 14 AWG Wire, Green
379042 Connector
379044-7 Plastic Tubing
885 Series P.T.O.
378966 Street Tee
379547 Pressure Switch
379253 Ring Connector
379254-14 14 AWG Wire, Black
1.00" Hole in Firewall
379265 Grommet
Slice Grommet Insert in Hole in Firewall
Run Wires Through Grommet in Firewall
379243 Speed Sensor
28-P-171 O-Ring
Reference Kits: 328388-52X = Air Shift 12 VDC with E.O.C. 328388-53X = Air Shift 24 VDC with E.O.C.
Electronic Over Speed Control (E.O.C.) Installation
Sketch for 885 Series 12 and 24 Volt (SK-468)
Owner’s Manual
Electronic Overspeed Control