Parker Hannifin S.p.A. - S.B.C. Division HPD N User’s Manual
97
14. Appendix I:options
For the HPD converters, the following options are also available:
Operator Interfaces
Field bus interfaces profibus-dp EC-4
Device Net EC-4
CanBus EC-4
ModBus EC-4
Sercos EC-4
Absolut encoder interfaces SSI EC-4
Hiperface EC-4
I/O expansions EC-4 – I/O BOX
High performance axis controls EC-4
Preparation for the expansion boards.
If you wish to use expansion boards such as the EC-4 or the EC-5, the converter must be ordered with
the code HPD x NE0, where x is the nominal current.
To Next Page
Loading...
