Parker Hannifin S.p.A. - S.B.C. Division HPD N User’s Manual
8
2.2. Software features
The following capabilities are implemented in the basic software supplied with the HPD
drive:
• Speed control
• Advanced torque limit manager
• Speed windows management
• Positioning with trapezoidal speed profile
• Digital locking functions with variable transmission ratio and phase shifting
• Spindle orientation
• Stepper motor emulation
• Torque control with overlaid speed control
• Acceleration ramp control with overlaid speed control
• Simplified maintenance and start-up mode
• Internal PLC for advanced input/output programming functions
2.3. Compliance with EMC standards
Immunity:
EN50082-1* / EN61000-6-2 Basic immunity specifications
IEC1000-4-2 (ex IEC 801-2) level 3 Electrostatic discharge immunity
IEC1000-4-3 (ex IEC 801-3) level 3 Electromagnetic field immunity
IEC1000-4-4 (ex IEC 801-4) level 4 Fast transient burst conducted immunity
Compatibility:
EN50081-1* / EN61000-6-4 Basic radio interference specifications
EN55011 group 1, class A Measurement limits for radio interference
EN55011 group 1, class B* Measurement limits for radio interference
2.4. Safety
Safety standard EN60065
Low voltage Directive 73/23/CEE amended by 93/68/CEE
Applied standard EN60204-1
Available with markcULus UL508C
* Conformity for use in domestic or industrial surroundings depends on the nature of the installation.
This is a product of the restricted sales distribution class according to EN61800-3.
In a domestic environment this product may cause radio interference, in that case the user
must use the properly measures.
To Next Page
Loading...
Need help?
General
