Parker IQAN-XA2 - Appendix A: Technical Overview; System Parameters and Ratings

26
IQAN-XA2 Technical Overview
Appendix A
Instruction book, IQAN-XA2
Appendix A
IQAN-XA2 Technical Overview
System
Parameter Remark
Temperature
Operating temperature
Absolute maximum temperature
Storage temperature
-40 to 70 °C
-40 to 85 °C
-40 to 100 °C
Voltage supply
Power on threshold
Over voltage on any pin
Reverse polarity protection on +BAT
9-32 V
6.2 V
34 V with respect to -BAT
with external 20A fuse.
-VREF load 2A
Power driver load total load on power drivers < 20 A
Current supply
V
BAT
=14V
V
BAT
=28V
typ. 95 mA
typ. 75 mA
Start-up time typ. 250 ms
Weight 750 grams
Environmental ratings
Parameter Remark
EMI
ISO 13766:2010/ISO 14982:2009, Radiated emission
EN 55025:2003, Conducted emission
ISO 11452-2:1995, Radiated Susceptilbility
ISO 11452-4:2001, Conducted Susceptibility
ISO 7637-2:1990, Conducted transient susceptibility
30-1000 MHz
0.15-108 MHz, Class 1
200-2000 MHz, 1 kHz, 80% AM, 100V/m
1-200 MHz, 1 kHz, 80% AM, 150mA
Pulse 1,2,2b,3a,3b,4, Level 3; Pulse 5, Level 1
ESD
ISO 10605:2001, ESD, operation
ISO 10605:2001, ESD, handling
15KV, air, 8 KV contact
4 KV contact
Mechanical environment
IEC 60068-2-64:2008 Fh, Random vibration
IEC 60068-2-27:2008 Ea, Shock
15- 250 Hz, 9.7 Grms, 3 x 10 hrs
40g, 6 ms,1000 x 6 directions
Climate environment
IEC 60529:2001, Enclosure protection
DIN 40050 Part 9:1993, Enclosure protection
IEC 60068-2-30:2005 Db, Damp heat cyclic
IEC 60068-2-78:2001 Cab, Damp heat, steady state
IEC 60068-2-2:2007 Bb, Heat, operation
IEC 60068-2-1:199
3 Ab, Cold, operation
IEC 60068-2-14:1984 Nb, Change of temperature
IEC 60068-2-52:1996 Kb, Salt mist
IP65
IP6K9K
55°C, 95% RH, 6 cycles
40°C, 93% RH, 21 days
70°C, 72 hrs
-40°C, 16 hrs
-30°C to 55°C, 10 x 8 hrs
72 hrs
Sensor supply, VREF
T
A
= -40 °C to +70 °C (unless otherwise specified)
Parameter Remark
Number of VREF 1
Output voltage 5 V ±150 mV
Temperature drift 0.25 mV/° C