Parker IQAN-XA2 - Appendix B: Error Handling; Error Codes, Messages, and Actions

31
Error codes, messages and actions
Appendix B
Instruction book, IQAN-XA2
Appendix B
Error codes, messages and actions
If one of the following error is detected, a message will be presented on the display together
with an error code on the module. In some cases, the module will turn off or at least shut down
the outputs, to increase safety.
The location of the LED indicators on the IQAN-XA2 module.
WARNING
Don’t use the machine if an error message or error code is activated.
The following sections will present what measures to take for different error situations put into
appropriate context.
LED indicator showing different XA2 modes
Status Flash
Normal operation (yel.)
Error
code
Error Primary Flash (red)
Error category
Secondary Flash (yellow)
Error description
3:1 CAN error
3:2 Address error
4:1
Memory error
a
a. FRAM memory error.
FE Fatal error
Green, power on
Yellow/ red, status LED