Parker IQAN-XA2 - DOUT and CAN Specifications

29
IQAN-XA2 Technical Overview
Appendix A
Instruction book, IQAN-XA2
Power driver, DOUT (on/off output)
Number of DOUT 12
Maximum load 2 A
Power driver voltage drop typ. 0.30 V @ 1.5 A load
Leakage current in OFF state
DOUT-A to DOUT-F
DOUT-G to DOUT-L
<100 uA
<1 mA
Maximum load inductance
V
BAT
= 14 V, single pulse
V
BAT
= 28V, single pulse
PWM (incl. Softstart, Softstop)
14 Ohm / 366 mH, 9.3 ohm / 126 mH, 7 ohm / 50 mH
28 Ohm / 334 mH, 19 ohm / 114 mH, 14 ohm / 46 mH
external clamping diode is mandatory
Protection over load, SCB, SCG
Diagnostics no
CAN
T
A
= -40 °C to +70 °C (unless otherwise specified)
Parameter Remark
Number of CAN buses 1
CAN specification 2.0A and 2.0B
CAN bus speed 250 kbit
Protection SCB, SCG
I/O
T
A
= -40 °C to +70 °C (unless otherwise specified)
Parameter Remark