Parker LVD1 - Identification; The Right Hand Side of LVD Drives Bears an Identification

Parker Hannifin S.p.A. - Divisione S.B.C. LVD User’s Manual
7
1.3 Identification
LVD drives are available in five models: LVD1, LVD2, LVD5, LVD10 and LVD15,
where the number stands for rated current (in amperes).
The right hand side of LVD drives bears an identification label showing all the most important
identification data.
Please make a note of the information on this label before requesting technical
information from Parker Hannifin S.p.A. Divisione S.B.C..
An example of the identification label is shown in the following figure:
POWER INPUT
3XAC230V 4.6A
50..60 Hz
POWER OUTPUT
3XAC230 5A
0..500 Hz
READ INSTALLATION
INSTRUCTION MANUAL
BEFORE INSTALLING
USE COPPER WIRE
RATED 60/75°C
LVD 5 S/N 980001
Parker Hannifin S.p.A.
VIA GOUNOD 1 - 20092 CINISELLO B.
(MILANO) - ITALY