PAGE 2
nformation in this installation, wiring, and operation
manual is subject to change without notice. One
manual is provided with each instrument at the time of
shipment. Extra copies are available at the price
published on the front cover.
Copyright © August 1993, all rights reserved. No part of
this publication may be reproduced, transmitted, tran-
scribed or stored in aretrieval system, or translated into
any language in any form by any means without the writ-
ten permission of the factory.
This is the Eleventh Edition of the 1/4 DIN Controller
manual. It was written and produced entirely on a desk-
top-publishing system. Disk versions are available by
written request to the factory - Advertising and Publica-
tions Department.
We are glad you decided to open this manual. It is
written so that you can take full advantage of the features
of your new process controller.
It is strongly recommended that factory equipped applications incorporate a high or
low limit protective device which will shut down the equipment at a preset process
condition in order to preclude possible damage to property or products.
I
NOTE
To Next Page
Loading...
Need help?
General
