Parweld XTM 221Di - MIG man - Manual MIG Welding; Remote Control MIG Torch

www.parweld.com
11
Adjust by Pressing Torch Buttons on the Handle.
7.4 Remote Control MIG Torch
Allows remote adjustment of the Voltage and wire speed from the
torch handle when in the welding screen.
MIG SYN MIG MAN
Operating screen (MIG SYN)
7.3 MIG MAN Manual MIG welding setup
Follow the screen prompts to complete the machine setup.
Example setting.
In manual mode you can adjust the parameters using the
controls indicated.
Parameter Scroll
Adjust Inductance (short circuit current)
Adjust Inductance (short circuit current)
Adjust Voltage Value
Inductance
Voltage
Up
Wire Speed
Parameter Scroll
Down
Torch with
OLED Display
Up
Parameter Scroll
Down
Parameter Scroll
Torch with
4 Button Control
Adjust Wire Speed Value
Trim Wire Speed
Trim Voltage