www.parweld.com
28
10.3 Gas Equipment
Everyday Gas Regulators 300 BAR
Single Stage
Features
Flow rate up to 96m
3
/h (3389 ft
3
/h).
Full 300 bar capability.
Outlet pressure indicated on the bonnet.
Bottom entry design suited for top outlet
cylinder valves.
Fittings
Fitted with standard 3/8" BSP outlet.
Fitted with 5/8" BSP inlet connections.
Stock Code Description Maximum Outlet Pressure
E700140 Argon Preset Regulator 3.0 Bar
E700141 Argon Indicator Regulator 3.0 Bar
E700113 1 Gauge Argon 30 lpm flow
E700123 2 Gauge Argon 30 lpm flow
Flow Meters
Features
Designed from brass bar whilst the tube
and cover are moulded from high quality
polycarbonate to ensure high impact
resistance and clarity.
Calibrated to operate at an inlet pressure
of 30PSI.
Sensitive needle valve provides easy
adjustment and the downward facing
outlet connection eliminates hose kinking.
Fittings
Fitted with standard
3
/8" BSP inlet and outlet connections.
Stock Code Description
706101 Flow Meter Mixed Gas 25 lpm (MIG)
706100 Flow Meter 0-12 lpm (TIG)
10.0 Accessories
10.1 Feed Rolls
Size: 30mm O/D x 10mm I/D x 12mm Wide
10.2 MIG Torch Spares
Available on page 26 of this manual, and from the machine
HELP menu.
Gas flow Tester
Designed to check gas flow at the front of MIG Torches.
Stock Code Description
806001 Gas flow Tester
Part No. Groove Wire Sizes Wires
DR5V0608 Plain V 0.6 - 0.8 Fe, Ss
DR5V0810 Plain V 0.8 - 1.0 Fe, Ss
DR5V0910 Plain V 0.9 - 1.0 Fe, Ss
DR5V1012 Plain V 1.0 - 1.2 Fe, Ss
DR5K1012 Knurled V 1.0 - 1.2 FC
DR5U0910 Plain U 0.9 - 1.0 AI
DR5U1012 Plain U 1.0 - 1.2 Al
To Next Page
Loading...
