PAW FC3.10 - General Settings; Language; Date; Time

10 General settings
24 99E13331xx-mub-en - V07 2021/03
FUNCTIONS
Circulation
Stratification of return
Modulating hot water temperature
Comfort function
In the example, the ticked check box indicates that the
function
Circulation is active at the moment.
The following functions are available:
• Circulation
• Stratification of return
• Modulating hot water temperature
• Comfort function
• Disinfection
• Alarm relay
• Parallel relay
• Hygienic flush/Protection against blocking
• Buffer storage*
• Reheating*
Detailed information in chapter
Description of function.
*Settings only visible with installer code (see chapter "User code").
10 General settings
In this menu, you can make all basic settings of the controller as well as update / modify
settings of the commissioning. The menu is structured as follows:
10.1 Language
Sets the desired language (see "Commissioning")
10.2 Date
Sets the current date. First set the day, the month and finally the year.
10.3 Time
Sets the current time. First set the hour, then the minutes.