18 Menu settings cascade
2021/03 99E13331xx-mub-en - V07 49
18 Menu settings cascade
By pressing the operating button ( ), the menu of the controller FC3.10 opens.
The menu bar contains multiple submenus in which you can find or modify various settings. The
available menu items of the first three levels are shown as a menu tree on the basis of the client
and will be explained in detail in the following chapters. Please note that the client contains
more menu items because the main settings are made via the client. The available menu items
of a server are marked with "**" in this menu tree.
*Settings only visible with installer code (see chapter "User code").
**Settings are visible at the servers.
Menu
Status**
Hot water
Functions
Circulation
Stratification of return
Comfort function
Disinfection
Alarm relay
Parallel relay
Hygienic flush/protection
against blocking
Buffer storage
Reheating
General settings**
Language
Date
Time
Synchronise date/time
Auto daylight saving time
Commissioning
Software update**
Display**
Cascade*
Cascade switchover points
Switchover point ON
Switchover point OFF
Switchover delay
Duration of standby module
Synchronise
Debug
Information
Internet module
USB**
Auto / manual mode**
User code**
Advanced
settings**
To Next Page
Loading...
