PAW FC3.10 - Internet Module; Registration; Set up the Network; Information

11 Internet module
26 99E13331xx-mub-en - V07 2021/03
Display Submenu for settings
of the display
- -
Brightness Sets the luminosity 1 … 100 % 80 %
Dim brightness Sets the dimmed
luminosity
1 … 100 % 50 %
Contrast Sets the contrast -15 … 15 0
Colour inversion Sets the colour
inversion
Yes, No Yes
Screen lock Activates the screen
lock
Yes, No No
Screen lock delay Sets the delay 1 … 10 min 2 minutes
11 Internet module
Via the Internet module, the domestic hot water module can be externally activated.
The following possibilities are available:
- Data logging inclusive analysis possibilities via the web service
- Remote maintenance
- Synchronisation of the time with the Internet
Additional instructions are enclosed to the WiFi-/Ethernet module. The following data can be
additionally set in the domestic hot water controller FC3.10:
11.1 Registration
The registration is required to retrieve data of the domestic hot water module via the Internet
and to make settings. With the registration, the module is assigned to a user within the web
service.
11.2 Set up the network
Automatic: To set up the IP address automatically, the option DHCP is selected. Afterwards, the
Internet module retrieves all settings from the DHCP server.
Manual: Via the menu items IP address, Net mask, Gateway and DNS address it is possible to
manually enter the network settings. For information about the values to be entered there,
please contact your network administrator.
11.3 Information
In this menu item, the current network settings of the Internet module are displayed. In addition,
the firmware version and the MAC address can be seen.