Fatigue Technology Inc. 401 Andover Park East Seattle, WA • USA 98188-2868 Tel: (206)246-2010 Fax: (206)244-9886
358856-REV K
ABOUT FATIGUE TECHNOLOGY INC.
Fatigue Technology Inc. (FTI) is a world-leading aerospace engineering and manufacturing company.
FTI pioneered Cold Expansion (Cx™) technology (which provides solutions to fatigue problems
associated with holes in metal structures) back in 1969 and has advanced this science to develop
innovative bushing and fastener products. These proprietary products and associated tooling may be
covered by patents or agreements owned by, or exclusively licensed to, Fatigue Technology Inc. Use of
tooling procured from other than a licensed source may constitute patent infringement.
The detailed tooling information in this manual was compiled and written by FTI. The tooling was designed
specifically for use with FTI’s Cold Expansion systems. FTI cannot be held responsible for damage or injury as a
result of operating this equipment if it is used for other than the process intended, with any other tooling not provided
by FTI, or not used in accordance with the instructions contained in this manual. To avoid personal injury, please
observe all safety precautions and instructions. FTI reserves the right to change specifications or configurations of
equipment detailed in this manual as part of our ongoing technical and product improvement programs. If you have
any questions about the use or serviceability of this equipment, please contact our Sales Department.
FTI’s Cold Expansion systems and processes are the subject matter of one or more of the following patents: 4,809,420;
4,885,829; 4,934,170; 5,083,363; 5,096,349; 5,103,548; 5,127,254; 5,129,253; 5,218,854; 5,245,743; 5,305,627;
5,341,559; 5,380,136; 5,405,228; 5,433,100; 5,468,104; 6,077,010; 6,183,180; 6,487,767; 6,792,657; 6,990,722;
7,024,908; 1,061,276; 513,898; 692015124; 581,385; 69310828; 468,598; 69105390; 643,231; 69414946; 696,686;
785,366; 1032769; and other patents pending. These systems and processes are tooling critical and must be performed
in accordance with FTI’s specifications or controlling documents. To ensure proper results from FTI’s Cold
Expansion systems and to be licensed to use FTI’s patented processes, it is essential that FTI’s complete integrated
system of tooling be purchased and utilized. The use of tooling purchased from other than a licensed supplier could
jeopardize fatigue life enhancement and may constitute patent infringement.
Fatigue Technology Inc. (FTI) has provided innovative solutions to fatigue problems in metal structures since 1969.
Complete systems of tooling are used worldwide to enhance the fatigue life of holes in airframes, turbine engines,
and other critical structures.
The FTI staff of professionals provides a full range of support services including:
* Application engineering.
* Detailed project planning, implementation, and management.
* On-site assistance, including training and tool room setup.
The Sales Department is always available to assist with special fatigue enhancement requirements. Please contact
FTI with questions at any time.
This manual can be made available in other languages. Please contact the Sales Department to request a copy.
To Next Page
Loading...