Peak Atlas DCA Pro User Guide June 2019 – Rev 1.7
Page 33
Running the DCA Pro PC software for the first time
Now you’re ready to start the DCA Pro companion
software. You can start the software in the
following ways:
All Windows Versions
Double click on the desktop icon.
or
Click on the “DCA Pro” item in the “Peak” folder
of your start menu.
Windows Vista, 7, 8 & 10 (Desktop mode)
Type “DCA Pro” into your start menu search box.
It doesn’t matter if you connect your DCA Pro before or after starting the
software.
When your DCA Pro is connected and your software is running, you should see
the green message
DCA Pro connected in the bottom left corner of the
program window.
For the first time you use the software, if you see the message:
DCA Pro disconnected then try unplugging the USB cable, wait a few
seconds and plug back in. If that doesn’t work (depending on your version of
Windows) then you may need to restart your PC to allow the WinUSB drivers
to initialise.
If you’re still having problems then you may wish to try uninstalling the
software and drivers and then re-trying the installation process by following the
step-by-step instructions shown earlier.
Please contact us if you have any difficulties, we’re here to help.
To Next Page
Loading...
