MEMORY interface
The MEMORY button accesses to the save list interface, which shows the save time, name and type of
saved files. Use up/down arrow keys to select specified row to save to. After accessing to the save
interface, insert a U disk and wait for a few seconds, then press F3 to copy selected file to the U disk
when “TO USB” characters become lighted, press ENTER to confirm when a copy finished window is
popped up before pulling out the U disk.
Insert the U disk to a PC and use upper computer software to view the copied file.
Available function keys:
Copy file to U disk after inserting a U disk and the characters of the key become lighted.
Delete selected saved file.
Return to previous interface.
Using the PC
The Analyzer is equipped with a LAN interface for communication with a PC. With supplied upper
computer software you can do remote control of the Analyzer on a PC. In addition, you can also view the
data and screenshot copied from a U disk with the upper computer software.
On USER Preference interface, set the “eth0” of the Analyzer correctly before connecting the Analyzer to
the internet with a network cable. Run the upper computer software, input the IP address of the Analyzer
to make the connection, an operation interface analoging the Analyzer will be displayed for a successful
connection. The saved file also can be downloaded from the analyzer.
-55-
To Next Page
Loading...
Need help?
General
