Pearpoint Flexitrax P550c - Page 115

P550c Operation Manual
5 System setup
www.pearpoint.com | 115
 WiFi status: Shows WiFi status, which may be:
 Disabled
 Not connected to network (but enabled)
 Connected
 WiFi icon: Shows which WiFi network the controller is currently connected to. If the WiFi network has
internet access, “(online)” is appended to the network name.
The connection status is also shown by icon (item 3 on page 114):
Not connected to a WiFi network
Connected to a WiFi network, but no internet connection
Connected to a WiFi network with an internet connection
 Enable WiFi/Disable WiFi: When you enable WiFi, the controller automatically scans for available
networks (APs or access points). For each network, you can see its name (or SSID), security protocol (if
secure) and signal strength.
Note: If your current location is not within range of a fixed WiFi network, you can enable a personal
hotspot on your cell phone. This allows other devices, including the P550c controller, to share your
phone’s data connection. (This method is also called data tethering.)