P550c Operation Manual
5 System setup
www.pearpoint.com | 116
Note: If the battery level is low on your controller, disable WiFi to save battery power. When WiFi is
enabled, a Disable WiFi button is shown on this screen.
Network list: Any available WiFi networks are listed on this screen. For each network, you can see its
name (or SSID), security protocol (if secure) and signal strength.
Connect: Use the Up/Down buttons or the arrow keys to select the network you want. Then press the
Connect button. Wait while the controller connects to the selected network. (While the controller is
connected to a network, the Connect button is replaced by a Disconnect button.)
If you choose a secure network, the controller prompts you for the network password. The password
is case-sensitive, and so be careful check whether Caps Lock is on, indicated by the icon in the
lower left corner of the screen. By default, password characters are obscured but you can click the
Show password button to display the actual characters.
To Next Page
Loading...