PENKO SGM700 - Setpoint Function Settings

SGM700 Digitizer
Configuration Menu -Fun-
6.1 - - - Fun setpoint function settings
Configure the weiger mode the outputs has to switch on press key 2 <2 sec to en-
ter the setpoint function settings menu.
Select the output you want to configure pressing key 1 <2 sec. Fun 1= output 1,
Fun 2= output 2, Fun 3= output 3 and Fun 4= output 4. Confirm the selected output
by pressing key 2 <2 sec.
The following screen is visible:
Scroll thru the weigher function options pressing key 1 and select which weigher
mode is needed by pressing key 3 >2sec. (options are: 1-17)
Up Down Confirm
For further detais on the weigher functions check appendix I
1 Weigher 10 Fast gross x 10
2 Fast gross 11 Fast Net x 10
3 Fast net 12 Gross x 10
4 Gross 13 Net x 10
5 Net 14 Tare x 10
6 Tare 15 Peak x 10
7 Peak 16 Valley x 10
8 Valley 17 Sample
9 Weigher x 10
24