PENKO SGM700 - Recall

SGM700 Digitizer
Configuration Menu -rcl-
The following screen is visible:
Set the time. Use key 1 and key 2 to change the number Key 1 is for changing
the number (1-9), key 2 is for changing the position of the cursor. Confirm by
pressing key 3 >2 sec. Format HH.MM.SS
Up Down Left Right Confirm
6.16 - - - rcL Recall
In Recall, you can reset all parameters back to facatory settings.
Press key 2 <2 sec to enter Recall.
The following screen is visible:
To set all parameters back to factory settings Press key 3 >2 sec.
71