PENKO SGM700 - Profibus Settings (SGM740 Only)

SGM700 Digitizer
Configuration Menu –Pb-
6.5 - - - - Pb Profibus settings (SGM740 only)
In this menu, the communication settings can be set for profibus.
Options are:
Press key 2 <2 sec to enter the profibus settings.
The following screen will be vissable:
In Pb 1 you set the profibus address of the SGM700. Press key 2 <2 sec. to
enter Pb 1. Set the address using key 1 and key 2 confirm by pressing key 3 >2
sec. (options are: 0-255).
Increase Decrease Left Right Confirm
When confirmd the following screen will be vissable:
31
Pb 1 Probus address
Pb 2 Value mode