PENKO SGM700 - Weigher Error Codes; 9 Ascii; ASCII Protocol Format

SGM700 Digitizer
76
8.1 Weigher error Codes
Error Code Description Solution
CCCCCC No proper calibration available Check calibration setting
UUUUUU Underflow
Check loadcell
Check platform construction
OOOOOO Overflow
Check loadcell
Check platform construction
======
Display overflow;
Exceed maximum display
value (max. load)
Reduce load on platform
Item Options
Baudrate 1200 / 2400 / 4800 / 9600 / 19k2 / 38k4 / 57k6 / 115k2 bps
Data bits 8-bits
Stop bits 1-bit
Parity NONE
9. ASCII
9.1 ASCII -Protocol Format-