EasyManua.ls Logo

PENKO SGM700 - Ethernet Serrings (SGM720 Only)

PENKO SGM700
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SGM700 Digitizer
Configuration Menu -Eth-
6.6 - - - Eth Ethernet settings (SGM720 only)
In this menu, the communication settings can be set for the ethernet port.
Options are:
Press key 2 <2 sec to enter the ethernet settings.
The following screen is vissable:
33
Adr 1 First three numbers of the IP address
Adr 2 Second three numbers of the IP address
Adr 3 Third three numbers of the IP address
Adr 4 Fourth three numbers of the IP address
Sub 1 First three numbers of the Subnet address
Sub 2 Second three numbers of the Subnet address
Sub 3 Third three numbers of the Subnet address
Sub 4 Fourth three numbers of the Subnet address
gAt 1 First three numbers of the Gateway address
gAt 2 Second three numbers of the Gateway address
gAt 3 Third three numbers of the Gateway address
gAt 4 Fourth three numbers of the Gateway address

Related product manuals