SGM700 Digitizer
Configuration Menu -Ind- -continiue-
The following screen is vissable:
Use key 1 and 2 to change the value. Key 1 is for changing the number
(1-9), key 2 is for changing the position of the cursor. Confirm by pressing
key 3 for >2 sec.
Increase Decrease Left Right Confirm
The following screen is vissable:
In Ind 2 you set the No motion band Indicator gives stable signal when weigher
value is stable within this range and time set with Ind 3.
Choose a value between: 0 – 999999.
To change the value press key 2 < 2 sec.
The following screen is vissable:
Use key 1 and 2 to change the value. Key 1 is for changing the number
(1-9), key 2 is for changing the position of the cursor. Confirm by pressing
key 3 for >2 sec.
Increase Decrease Left Right Confirm
40
To Next Page
